Abrasive Manual Metering Valve
MQV-Pro
-
More
Uptime & Reliability
Compatibility with all common media
No additional sleeves or inserts required
Better
Serviceability on the Pot
Adjustability under Pressure with optional kit
Media flow - 10% higher than competitive valves
Tested with 25 & 80-grit hardened steel media thru unpressurized hopper
Different
Single signal line simplifies setup
Piston actuated – no moving diaphragms
Patented two-stage seal for better control and less wear
U.S. Patent Nos. 11,931,864 & 12,365,062
Less
Maintenance required
Complexity and wear items
Time needed for maintenance
10-minute actuation assembly swap
Servicing the MQV-Pro
-
The Clemco MQV Pro makes maintenance straightforward with an accessible metering assembly that can be serviced without removing the entire valve from the blast machine. After emptying and depressurizing the machine, locking out the air supply, and bleeding trapped air, clean and inspect the components, replace worn parts and seals, then lubricate and reassemble as specified. Finish with a leak check and abrasive flow adjustment to support consistent metering, dependable performance, and productive blasting.
Models and Pricing
-
Available through Authorized Clemco Distributors in USA, Canada and Mexico.
MSRP USD $457.00
31607 — MQV-Pro 1.25”
• Dimensions: 8.5”(L); 6”(W); 6”(H)
• Weight: 7.8 lbs.
31608 — MQV-Pro 1.50”
• Dimensions: 8.5”(L); 6”(W); 6”(H)
• Weight: 7.8 lbs.
Proven Performance. Rugged Reliability.
Generations of Excellence Transforming Our World, Worldwide since 1949
•
Generations of Excellence Transforming Our World, Worldwide since 1949
•
Generations of Excellence Transforming Our World, Worldwide since 1949
•
Generations of Excellence Transforming Our World, Worldwide since 1949 • Generations of Excellence Transforming Our World, Worldwide since 1949 • Generations of Excellence Transforming Our World, Worldwide since 1949 •
